Description Display Symbols - Faema E71 Gebrauch Und Installation

11. Description display symbols

WATER LEVEL
This symbol indicates the boiler water level.
During the loading phase, the bottom part of the
icon blinks.
When the optimum level is reached, the symbol
looks like this:
RESISTANCE
This symbol indicates that the resistance is
passing through the resistance shows the electric
heating is on.
When the boiler pressure reaches the set value,
the icon looks like this:
This indicates that the heating resistance
has been disabled.
Note: the customer cannot switch on or switch
off the electric heating.
When the on/off function is programmed, the
electric heating takes place automatically.
SEVICE BOILER PRESSURE
This symbol indicates the boiler pressure
value.
If the icon
pressure gauge will be displayed analogically.
This will be shown on the display:
Press again the icon
regular display mode.
.
.
is pressed, the
to return to the
CUP-WARMER
WIFI
WIFI connection symbols:
- connected to the network.
BLUETOOTH
These symbols refer to Bluetooth communication:
- the grey icon indicates the presence of the
- the white icon indicates that the machine
is communicating with a Bluetooth grinder/
dispenser.
USB
This symbol appears on the display when
a USB pen drive is connected.
SD
This icon indicates the presence of an SD micro
chip in the CPU board of the machine.
PAYMENT SYSTEMS
This icon indicates that the machine is connected to a
Dispensing is therefore possible subject to approval by the
payment system.
- the grey icon indicates that the cash system has
- the white icon indicates that the cash system
has approved the transaction.
12 EN
These symbols indicate the
power currently selected by
the cup warmer.