74 www.electrolux.com
FILLING THE RINSE AID DISPENSER
A
B
A
+
-
C
D
1.
Press the release button (D) to open
the lid (C).
2.
Fill the rinse aid dispenser (A), no more
than the mark 'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the re-
leased quantity (B) between posi-
tion 1 (lowest quantity) and position
4 (highest quantity).
When it is necessary to fill the rinse
aid dispenser, the display shows a
message. The message is off while
a programme operates.