Volume Adjustment; Usb Input - Trevi XT 108 BT Gebrauchs- Und Anschlusshandbuch

ENGLISH
you want to activate on the remote controll: FM (the frequency is displayed), BLUETOOTH ("Bt" appears in the display),
USB, AUX-IN (AUX appears in the display).

VOLUME ADJUSTMENT

Press and hold NEXT/VOL+ (4) button for a few seconds to increase the volume, or press the VOL+ (26) button
1.
on the remote control
Press and hold PREV/VOL- (5) button for a few seconds to decrease the volume, or press the VOL- (24) button
2.
on the remote control
Press the MUTE button (27) on the remote control to temporarily exclude the sound, press it again to reset it.
3.
FM RADIO FUNCTION
AUTOMATIC RESEARCH
1. Turn on the unit and press the POWER/MODE (7) button on the unit repeatedly and select the RADIO function,
or press the FM (16) button on the remote control (frequency display will appear on the display).
2. Press and hold the PLAY/PAUSE button (6) on the unit for a few seconds or hold down some AUTO (17) button
on the remote control to activate automatic station broadcasting (the radio starts automatic radio station search
and saves it automatically in memory). The number of stored stations depends on the radio signal in your area.
During the search, press the PLAY/PAUSE (6) button on unit or the AUTO (17) button on the remote control to
stop storing.
3. Use the NEXT/VOL+ (4) and PREV/VOL- (5) buttons on the unit, or the NEXT (18) and PRE (19) buttons on the
remote to listen to the various radio stations stored in memory.

USB INPUT

1. Insert a USB memory into the socket (1).
2. Turn on the unit and press the POWER/MODE (7) button on the unit several times, or press the USB button (15)
on the remote control and select the USB function,
3. To pause playback, press the PLAY/PAUSE (6) button on the unit or the remote control key (13) on the
remote control, "PAUS" will appear on the display.
4. To resume playback, press the PLAY/PAUSE (6) button on the unit again or the remote control button(13)
on the remote control.
5. Press the NEXT/VOL+ (4) or PREV/VOL- (5) button on the unit, or the PRE- (12) or NEXT+ (25) buttons on the
remote control while listening to the previous or next track.
6. Press the REPEAT (20) button on the remote control once, the display (2) will show "ONE" to play the same track
continuously; Press it a second time, "ALL" will appear on the display (2) to continuously play all the tracks in
the USB memory.
Note:
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cables.
- From the computer format the USB memory in FAT (16 or 32).
BLUETOOTH
1. Turn on the unit and press the POWER/MODE button (7) repeatedly on the unit and select the BLUETOOTH (Bt)
function, or press the BT button (22) on the remote
Bluetooth devices to pair.
2. Activate Bluetooth functionality on the external device to pair and start searching for devices. At the end, select
the "XT 108 BT" device.
3. Enter the "0000" password if prompted.
4. A confirmation tone will be output after pairing.
5. Press the PLAY/PAUSE button (6) on the unit or the key (13) on the remote control to start playback.
6. Press the PLAY/PAUSE button (6) on the unit or the key (13) on the remote control, press again to resume
.
.
control. The system will automatically search for external
8
XT 108 BT