Technical Data; Intended Use - Protool CSP 85/60 Bedienungsanleitung

Technical data

Type reference
Voltage
Frequency
Rated input
Power output
No-load speed
Cutting depth adjustable
for 90°
for 45°
for 60°
Mitre cutting angle adjustable
Saw blade:
outer diameter
center hole diameter
thickness
Riving knife thickness
Weight of the electric tool
Guide plate dimensions
Safety Class
Operating controls & Description
1. Guide plate
2. Main handle
3. Front handle
4. Lock-off button of the mains switch
5. Mains switch
6. Locking lever for cutting depth adjustment
(front)
7. Locking lever for cutting depth adjustment
(rear)
8. Cutting depth scale
9. Screw for cutting angle adjustment
10. Cutting angle scale
11. Movable guard of the saw blade
12. Saw blade
13. Lever for movable guard opening
14. Gauge mark
15. Rip fence
16. Guide rail
(not included in the delivery)
17. Cutting guide
(not included in the delivery)
18. Dust/chips extraction adapter
19. Spindle locking device
20. Blade fixing screw
��
21. Clamping flange
GB
22. Riving knife
23. Screw for riving knife attachment
CSP 85/60
24. Hexagon key
230 V ~
The accessories shown or described in this
50/60 Hz
Operating Manual may not be included as a part
2 200 W
of delivery.
1 230 W
Symbols used in the manual
4 100 min
–1
and on the machine
16 – 85 mm
max. 60 mm
max. 42 mm
0° – 60°
240 mm
30 mm
1.8 mm
2.1 mm
8.3 kg
214 × 432 mm
II /

Intended use

Particularly robust portable circular saw for
carpentry works, with large power reserves, in-
tended for sawing solid wood, glued boards etc.
in carpentry or woodworking in general, both for
workshop and site application.
For mitre cutting, crosscutting and straight rip
cutting.
The incorporated soft-start device considerably
extends service life of the drive system.
The range of applications and operation modes
and may be extended by using the accessories
listed in this Operating Manual.
The user is solely liable for damage and acci-
dents caused by improper use of the product.
For safe work with this electric tool and preven-
tion of injury, it is imperative to follow all gene-
rally accepted safety principles and regulations
for prevention of accidents, and read the en-
closed "Safety instructions" thoroughly.
The manufacturer disclaims liability for damages
caused by unauthorized modifications or using
other than the supplied or specified accessories
with the electric tool.
Not to be included in municipal refuse.
Double insulation.
This symbol is used to mark safety
instructions that must be observed to
prevent damage to persons.