BST FIRST-SERIES Bedienungsanleitung Seite 11

F I R S T- S e r i e s
D S P C O N T R O L O F S U B W O O F E R
The subwoofer DSP control menu selections are available for the 12", 15'' and 18'' subwoofers.
Mode LIVE(default)
MUSIC
Dj1
Dj2
Low Pass OFF(default)
80Hz
100Hz
120Hz
150Hz
12"
15"
DELAY OFF(default)
0-30ms
POLARITY POL+(default)
POL
LCD DIM ON(default)
OFF
BRIGHT 5(default)
1-10 adjust
RESET ON(default)
ARE YOU SURE?
YES OR NO
INFO Brand Prouduct Name
Firmware Version
EXIT
* Notice !
The display returns to the home screen after twenty second of inactivity.
Mode Menu
The Mode menu is used to configure the type of sound the subwoofer delivers.
Available options for this selection are: MUSIC, LIVE, and CLUB.
• LIVE - is used for recorded music playback and EDM applications. (Default)
• MUSIC - is used for live sound applications.
• DJ1- is used for recorded electronic music playback.
• DJ2 - is used for recorded electronic music playback.
LOW PASS Menu
The LOW PASS menu is used to select low pass frequency for proper summation with a full-range loudspeaker. Available
options for this selection are: 80Hz, 100Hz, 120Hz, 150Hz, 12", 15". The low passes are 24dB / octave Linkwitz / Riley slopes.
The 80Hz, 100Hz, 120Hz, and 150 Hz selections are generic low pass settings for use with other full-range loudspeaker
systems. 12", 15" settings are specifically optimized for full-range loudspeakers for best summation. The default is OFF.
POLARITY Menu
The POLARITY Menu is used to adjust the loudspeaker polarity. The default is Polarity+.
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for twenty seconds. Available options for this
selection are: ON or OFF. The default is ON.
BRIGHT Menu
The Bright menu is used to determine the brightness of the LCD. The range is 1 to 10. The default is 5.
CONTRAST Menu
The Contrast menu is used to determine the contrast on the LCD. The range is 1 to 10. The default is 5.
© Copyright LOTRONIC 2018
www.bst-dj.com
Page 10