Specifications - Evh 5150III Bedienungsanleitung

ONE
Y . EVH FOOTSWITCH—The footswitch allows easy selec-
tion of any of the three channels as well as the effects
loop. When illuminated, the Green, Blue, and Red chan-
nel LEDs correspond with the channel LEDs on the ampli-
fier's front panel.
Type: PR 684
Part Numbers:
2251000x00* (120V, 60Hz);
2251004x00* (230V, 50Hz) UK;
2251007x00* (100V, 50Hz) JPN;
Power Requirement: 533W
Output: 100 Watts RMS into 4, 8, or 16 Ohms
Input Impedance: 1MΩ
Output Impedance: 4Ω / 8Ω / 16Ω (selectable)
Fuses: 100V units, F7A L, 250V;
Footswitch (included): 4-button, one / two / three / effects on-off (070926)
Tube Complement: Four 6L6WXT output tubes, Eight 12AX7 preamp tubes
Weight: 55 lb (25 kg)
Height: 10.25" (26 cm)
Width: 29.75" (75.5 cm)
Depth: 11.5" (29.3 cm)
Recommended Speaker Enclosures:
5150-III 412 Straight Speaker Enclosure, 2252100x00*
*Exterior color code: Black "x"=0, Ivory "x"=4
TWO THREE
Note: The
amplifier prior to turning on the POWER. If the footswitch is
disconnected or reconnected after power-up, the amplifier
may not function correctly.

Specifications

2251001x00* (110V, 60Hz) TW;
2251005x00* (220V, 50Hz) ARG;
2251009x00* (220V, 60Hz) ROK
120V units, F6A L, 250V;
EFFECTS
-III footswitch should be connected to the
2251003x00* (240V, 50Hz) AUS;
2251006x00* (230V, 50Hz) EUR;
220-240V units, F3A L, 250V;
9