Herunterladen Inhalt Inhalt Diese Seite drucken

Getting Started - Levoit LV-H126 Bedienungsanleitung

Personal hepa luftreiniger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
G E T T I N G S TA R T E D
1.
Carefully remove your air purifier from the box and bag.
2. Remove the rear cover by pressing the top tab down.
[Figure 1.1] Then, lift off the rear cover.
3. Take the filters out of the purifier. Remove the filters
from their plastic packaging.
4. Place the black pre-filter on top of the white HEPA filter.
Make sure the white pull tabs are folded over the pre-
filter.
5. Place the filters back into the air purifier. The
pre-filter and pull tabs should be facing out.
[Figure 1.2]
6. Replace the rear cover.
a. Make sure the side with the filter reminder wheel
is facing out.
b. Insert the cover's feet into the matching slots in
the back of the air purifier. [Figure 1.3]
c. Press the rear cover into the housing until the
latch clicks.
7.
Place your air purifier on a flat, stable surface, such as
a table.
NOTE:
We recommend allowing 38 cm (15 inches) of clearance on all
sides of the purifier. [Figure 1.4]
Do not place anything on top of your air purifier.
6
Figure 1.1
Figure 1.2
Figure 1.3
38 cm
Figure 1.4
pull tabs
facing out

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis