Boundary Markers; Using Boundary Markers - Neato Robotics XV-Serie Gebrauchsanleitung

Boundary Markers

Boundary Markers are useful tools that tell your Neato Vacuum where not to clean.
Boundary markers are most helpful when you want to:
• Create a boundary where one does not exist. You
might have a large open plan house where you
want to clean a subset of a large room like the
shaded area shown here.
• Keep your Neato Vacuum away from any item
that you don't want the vacuum to get near.

Using boundary markers

To use the markers, simply lay the boundary marker flat on the floor from one wall to
the opposite wall to block off an area. The Neato Vacuum will clean the floor on the
side of the boundary marker that it is started on. Place the vacuum within the bounded
area and press START. The vacuum recognizes the boundary markers and will not cross
them. You can use scissors to cut a shorter length of the boundary markers if needed.
When finished, the vacuum returns to its charging base or to where it started if it cannot
find its base. (In this case, you need to start charging the vacuum as soon as you can.)
Neato Vacuum User's Guide
Boundary Markers
28'-0"
~350 Sq Ft Scheduled Area
Kitchen
5'-0"
41