Play Mode - SOUNDMASTER PL905 Sicherheits-/ Umwelt-/ Aufstellhinweise

Remark
- The system can detect and read the file under MP3 format only though the USB port.
If connect the system to MP3 player via the USB socket,
-
player may not be able to play
USB port does not support connection with USB extension cable and is not designed for communication with
-
computer directly
MP3 track format requirement:-
MP3 bit rate : 32 kbps~256 kbps.
-
- The performance of playing MP3 file is various from the quality of recording disc and the method of recording.
 Play mode
Press the play mode button (44) during playback to select repeat and random function, a single track, single folder or all the
tracks can be played in difference mode as follow:-
(1) repeat 1 (2) repeat all track
Indicator

Play mode

on LCD display
Repeat 1 track
Repeat all
Repeat folder FOLDER
Random RAN
Off mode --------------
Repeat play

You can listen the desired tracks or folder repeatedly by this function.
Random play

You can listen all the tracks in a random order by this function
USB programming
Up to 30 tacks can be programmed for MP3 play in any order. Before use, be sure to press the " USB
1. Set in USB mode & stop the playback.
2. Press the "mem/clk-adj" button (44), " MEM " will appear on LCD display. Moreover, it will indicate program no. P- 01 .
3. Select a desired track by pressing skip up
4. Press the"MEM/CLK-ADJ" button (44) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press "
7. Press " stop " button (44) to terminate program play.
Press " stop " button (44) at USB stop mode to cancel all programmed memory.

 Press the " folder / pre-up " button (44) to select the 1
selection.

The programming model will automatically stop if no button is being pressed in a period of about 10 seconds after
pressing the " mem/clk-adj " button (44).
Listing to tape
General operation
Select the function button to select Tape mode. The LCD display (3) will show " TAPE "
Cassette playback
Stop and ejection
Fast forward
Remark
- Make sure the direction is correct when inserting the tape into the system.
- There is some searching noise can be heard and the system cannot perform normal playback function during fast
forward mode.
via the USB socket. This is not a malfunction of the system.
(3) repeat folder
or down
: The system will start the playback automatically after inserting
of cassette tape
: Press the " Tape forward / Eject " button completely inwards
and the cassette tape will be ejected though the cassette door cover. The " Tape forward /
Eject " button will keeping at lowest height position.
: Press the " Tape forward / Eject " button half inwards during
Playback mode, the tape winding forward direction. The " Tape forward / Eject " button will
keeping at middle height position.
Slightly press the " Tape forward / Eject " button again to resume normal playback. The " Tape
forward / Eject " button will resume to the highest position.
due to variances in MP3 encoding format, some
(4) random
buttons (16/44).
" button (44) to play the disc in assigned order.
st
track of next folder directly and hence to speed up the song
22
MP3
(5) off mode
" button (44)
stop