Enabling/Disabling The Hotkey Delay - G&D TradeSwitch2-USB Installation Und Bedienung

Enabling/Disabling the hotkey delay

Press the
Hotkey+Backspace
seconds in order to start the setup mode in the default settings.
You can disable the hotkey delay if you want to start the setup mode immediately
after pressing the key combination.
How to enable/disable the hotkey delay:
1. Press Hotkey+Backspace
ble the setup mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7  enables hotkey delay
 disables hotkey delay
8
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
3. Press the
Space
Yes  enables hotkey delay
 disables hotkey delay
No
4. Press the key to save your settings.
S
(default:
Alt Gr+Backspace
(default: Alt Gr+Backspace
or keys to select the
Arrow
key (repeatedly) to enable/disable the hotkey delay:
Configuration
) key combination for seven
) simultaneously to ena-
entry.
Hotkey Delay
G&D TradeSwitch2-USB · 24