Before using your appliance
for the first time
Preliminary
cleaning
Initial burn-in
Subsequent cleaning
Safety of the
burners
50
Take the accessories out of the oven.
Remove all packaging remnants, e.g. polystyrene
parts, from the oven.
1.
Clean the appliance exterior with a soft
moistened cloth.
2.
Remove the inset racks from the oven.
3.
Clean the oven and the accessories with a hot
detergent solution.
Please observe the operating instructions
furnished with the hob.
Heat the empty oven for approx. 30 minutes.
Select top and bottom heat at a setting of 240° C.
Clean the oven with a hot detergent solution.
Install the inset racks.
All hotplate burners are secured in such a way that
the gas feed is interrupted when the flame is
extinguished. This is done thermoelectrically.
If the hotplate burners are on, there is a hissing noise.