Status Led (Activity); Rc Configuration - Massoth DiMAX 8130001 Bedienungsanleitung

3.1. Status LED (Activity)

The Operation Mode of the RC Receiver is shown by the STATUS
LED, named „ACT". It may take the receiver up to 15 sec. after the
power-up to be ready for operation!
Operation Mode of the STATUS LED
On (steady)
Flashing symmetric
Flashing asymmetric

3.2. RC Configuration

The RC configuration is set with the integrated DIP-switches. Four ra-
dio frequencies are available. If interferences occur, the frequency
may be changed to solve this problem and to ensure high quality ra-
dio control. A frequency change will also be required for the RC
transmitters. The transmitter settings are to be found in the Naviga-
17
Illustration 5: Positioning and
Range
Regular Operation
with one or several RC transmitters
Radio interferences detected
RC Receiver Standby
After switch-on or if no RC transmitter is detected within a few
seconds.
DiMAX Multi-Funkempfänger / Multi-RC Receiver – 8130001