1
Notes
This instruction manual is intended to ensure safe and efficient handling and operation of
Industrial IT products.
The instruction manuals must be read carefully by personnel before commencing any type of
work.
All of the safety notices and handling instructions given in the manual must be obeyed in order
to ensure that work is carried out safely.
Operation of the system is subject to the laws and regulations which are applicable in the
respective country at national, federal, European and international level.
The generally accepted rules of technology, usually in the form of standards, directives,
regulations, conditions and technical rules specified by national and federal organisations as
well as trade associations and committees for the field of specialisation concerned, shall apply.
Figures used in this instruction manual are provided for basic understanding and may differ
from the actual design.
The operator/operating company is independently responsible for compliance with and
observance of any subsequently introduced technical innovations or new legal requirements, as
well as for all usual obligations of the operator/operating company.
The original version of this instruction manual was written in German. All non-German versions
of this instruction manual are translations of the German instruction manual.
1.1
Limitation of liability
Lenze shall not be liable for personal injury, property damage or damage caused to the device
as well as consequential damage that is/was the result of non-compliance with this instruction
manual, improper use of the device, repairs and other actions on the device by unqualified
electricians and electricians not certified by Lenze, or that is/was the result of using
unapproved replacement parts. Failure to observe the maintenance intervals shall also result in
exclusion from liability.
Furthermore, it is strictly forbidden to make any unauthorised alterations or technical
modifications to the device.
1.2
Relevant device documentation
The following documents are decisive to device setup and operation:
Instruction manual:
Contains information for installation, commissioning and operation of the device along with
technical data of the device hardware.
Lenze • BA v200-C v800-.C • 1.1
Notes
Limitation of liability
55