Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3B SCIENTIFIC
Teslameter, 20 mT, 200 mT (115 V, 50/60 Hz)
Teslameter, 20 mT, 200 mT (230 V, 50/60 Hz)
1003313 (115 V, 50/60 Hz)
1003314 (230 V, 50/60 Hz)
Instruction sheet
04/12 ALF
1. Safety instructions
The teslameter, 20 mT, 200 mT conforms to all safety
regulations
for
electrical
monitoring and laboratory equipment, as specified
under DIN EN 61010, Section 1, and the equipment has
been designed to meet protection class II. It is intended
for operation in a dry environment, suitable for the
operation of electrical equipment and systems.
Safe operation of the equipment is guaranteed, provided it
is used correctly. However, there is no guarantee of safety if
the equipment is used in an improper or careless manner.
If it may be assumed for any reason that non-
hazardous operation will not be possible (e.g. visible
damage), the equipment should be switched off
immediately and secured against any unintended use.
•
Before using the power supply unit for the first
time, confirm that the specifications printed on
the rear side of the housing are compatible with
the local mains voltage.
•
Before using the power supply unit for the first
time, check the housing and the mains lead for
any
damage.
malfunction/operational
damage, switch off the unit immediately and
secure it against unintended use.
•
The equipment may only be opened/repaired by
qualified and trained personnel.
®
PHYSICS
measuring,
control,
In
the
event
of
defect
or
The teslameter is used for the measurement of flux
densities in steady magnetic fields.
The unit includes a Hall sensor probe for measuring
axial and tangential magnetic fields up to 200 mT.
The magnetic field probe is provided with a metric
scale for measuring distances.
In addition to having a digital display, the unit
outputs a voltage proportional to the magnetic field
which can be measured with a data logger, XY-
recorder or analogue multimeter.
The teslameter is available in 2 versions for differing
mains voltages. The teslameter with the order number
1003314 is for mains supplies of 230 V (±10%) while
the one with order no. 1003313 is for 115 V (±10%)
systems.
any
visible
1
1
Teslameter
2
Magnetic field probe
2. Description
Werbung
Inhaltsverzeichnis
