Installing The Mulch Kit; Installing The Side Ejection Channel; Filling With Engine Oil And Checking The Oil Level; Filling With Petrol - FLORABEST FBM 190 A1 Originalbetriebsanleitung

GB MT
equipment.
3. Release the impact protection
(7). It holds the grass collection
box in position.
Dismantling the Grass Collec-
tion Box:
4. Lift the impact protection (7) and
remove the grass collection box
(20).

Installing the Mulch Kit

Before using the mulch kit, the side
ejection channel must be removed
(see )
Fixing the Mulch Kit:
1. Remove the grass collection
box (
2. Lift the impact protection (7).
3. Insert the mulch kit (27). The
red safety button (32) clicks into
place.
Removing the Mulch Kit:
4. Lift the impact protection (7).
5. Press the red safety button (32)
downwards and remove the
mulch kit (27).
Installing the Side Ejection
Channel
The side ejection channel installed for us-
ing side grass ejection lines up the grass
clippings on the side.
Before using side grass ejection,
the mulch kit must be installed and
the grass collection box removed
(see ).
1. Install the mulch kit (27) (see
2. Lift the side impact protection (16).
66
20) if it is installed.
3. Hook in the side ejection chan-
nel (28) and release the side im-
pact protection (16). It holds the
side ejection channel in position.
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscrew the oil filler cap and
dipstick (8) and pour oil into the
tank. The oil tank holds 590 ml
oil. Use brand oil (e.g. SAE 30).
2. To check the oil level, wipe the
dipstick (8) on a clean cloth
and replace it in the tank until it
stops.
3. After pulling it out, read off
the oil level on the dipstick.
The oil level should be in
the marked area between
the minimum and maxi-
mum marks.
4. Wipe off any spilt oil and
close the oil filler cap (8).
Check the oil level every time be-
fore mowing and add oil when the
lower marking point is reached.

Filling with Petrol

Warning! Petrol is flammable
and hazardous to health:
- Keep petrol in containers in-
tended for this purpose;
- Only refuel outdoors and never
with the engine running or when
the machine is hot;
). - Open the filler cap carefully to al-
low excess pressure to escape;