jbc JT 7750 Betriebsanleitung Seite 3

SPECIFICATIONS
The JT 7750 is a hot air generating station intended
for repair work involving electronic circuits with
SMDs of any size.
- JT 7750 230V
- JT 7750 120V
- JT 7750 100V
JT 7750 is also sold supplied without extractors
or protectors:
- JT 7750 230V WE
- JT 7750 120V WE
The station's components
- Control unit with 1000 W heater
- JT 8801 heater stand
- Extractor stand
- Set of 5 protectors
- Set of 5 extractors
- 2 tripods for the protectors
- Set of 4 suction cups
- 3 nozzles:
ø 4
ø 6
ø 8
In order to make the nozzles removal easier, the
stand has a special bushing.
- Suction tube with connectors
- Instruction manual
The pedal ref. 0964551 can be connected to
the connector placed at the rear of the station.
This article is not delivered with the station.
Control unit technical specifications
- Temperature selection from 150 to 450°C (300
to 840°F).
- Accuracy of selected temperature: ± 5%
- Air flow regulation: 6-45 l/min
Ref. 7750200
- Station's maximum power: 1000W
Ref. 7750100
- ESD protected housing.
Ref. 7750109
Typical surface resistance: 10
- Equipotential connector and the metallic part
of the heating element are connected to
Ref. 7751200
station mains ground supply for ESD
Ref. 7751100 protection.
- Complies with CE standards on electrical
safety, electromagnetical compatibility and
antistatic protection.
Ref. 0788801
- RoHS compliant.
Ref. 0932845
- Weight of complete unit: 8.7 kg (19.2 lbs).
Ref. 0930110
Safety measures
-
Ref. 0932015
Ref. 0932012
-
Ref. 0932020
-
Ref. 0932330
-
Ref. 0007295
-
2
This product should not be thrown in the
garbage.
Incorrect use of this tool may cause fire.
Be cautions when using the tool in places
where inflamable products are stored.
Heat can cause fire to inflamable products
even when they are not in sight.
Do not use when the atmosphere is
explosive.
Place the tool back on its stand in order to
let it cool down before you store it.
ENGLISH
5 11
-10 Ohms/square