Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mini
Step
Step
Fit
bracket for the back wall of
the speaker, also using the
screws provided. There are
already three holes on the
back of the speaker for this
Insert the
foam plug
purpose. Make sure that the
upper part of the mounting
bracket lies flush against the
Mounting
back wall of the speaker. The
bracket for the
middle screw should only be
back wall of the
hand-tightened.
speaker
Also see Step
Only hand-tighten
Close off the bass tube with
the middle screw
the supplied foam plug, in
order to avoid ventilation
sounds.
- Mount the rubber feet -
Mount the
rubber feet
The last step is to connect the
two connection cables to the
connection terminal.
Please take note of the
polarity!
Bring
position, as shown in the
graphic on the left, and slide
the two elements of the
mounting bracket into each
other.
If the two elements are
seated
Re:sound G mini now "floats"
on the wall and has a space
around it of about 10 mm/ 0.4
inches.
14
Re:sound
the
wall
mounting
the
speaker
correctly,
into
the
Werbung
Inhaltsverzeichnis
