SKF TKSA 40 Bedienungsanleitung Seite 17

When registered by the display unit, the measured position is checked on the display.
Fig. 16 9 o'clock measurement position checked
Repeat the same sequence with the measuring units at the 3 o'clock and at 12 o'clock
position.
Next steps:
Once the last measurement (12 o'clock) is confirmed the result screen is displayed
automatically (see section 3.6).
Until the last measurement is confirmed, it is still possible to navigate to:
Dimension module, to correct the dimensions entered in section 3.4.
Settings menu, to adjust general settings (see section 4).
File manager, to display and manage the saved files. See 5.
16
Dimension module
Settings menu
File manager
SKF TKSA 40