Use And Servicing; Control Panel - aldes C.AXPIR Installations- Und Wartungsanleitung

3. USE AND SERVICING

3.1. Control panel

3.1.1. C.Axpir Digital
1 2 3
POWER HEPA
MAX
MIN
1. Suction power
2. Filter clogging level
3. Electrical protection
This indicator lamp fl ashes if the thermostat or circuit breaker on the equipment is activated. In this case, switch off the central vacuum
cleaner and unplug it from the power supply. Wait for the thermostat to cool down (ten to fi fteen minutes) then press the circuit breaker
button to restart the central suction unit.
4. Number of hours in use
Press MODE to display the use time.
5. Tank fi lling indicator
When the small black screen is completely dark, this means that the tank must be emptied. This symbol is managed by the pressure
sensor located in the motor box.
6. Maintenance necessary warning
A general motor service is necessary when this indicator lamp is fl ashing. Contact your installer. You can continue to use the central
vacuum cleaning whilst waiting for the installer's intervention.
MODE
3.1.2. C.Axpir Dynamic
1
4 5
RUN DUST
REST
REST Stop/Reset
MODE Menu
2
1. LED that indicates that the unit is switched on
2. LED that indicates that the unit is running
6
SERVICE
Increase the power/navigation in the menu
Start/Reduce the power/navigation in the menu
18