Teaching-In On Max! Components - eQ-3 MAX Bedienungsanleitung

8. Teaching-in on MAX! Components

In order to use the MAX! Radiator Thermostat in your ins-
tallation, you must teach it in to the MAX! system. You can
use the MAX! Radiator Thermostat either in conjunction
with the MAX! Cube (house solution) or without the MAX!
Cube (single room solution).
Teaching in with MAX! Cube (house solution):
• First activate the teach-in mode of the MAX! Cube. Please
start the local MAX! software and click on „New device".
• Now activate teach-in mode on the radiator thermostat.
Press and hold down the Boost button for at least 3 se-
conds. The antenna symbol (
the teach-in time remaining in seconds. The teach-in
time is 30 seconds.
As soon as the MAX! Radiator Thermostat has been
taught in to the MAX! Cube, all data such as date,
time or weekly program are transmitted to it via the
radio connection.
The MAX! Radiator Thermostat can only be taught-
in on one MAX! Cube. If the MAX! Radiator Thermo-
stat has already been configured with a MAX! Wall
Thermostat, a factory reset must be performed prior
to teaching-in for the first time to a MAX! Cube (see
section 9).
Teaching in without MAX! Cube (single room solution):
• First activate the teach-in mode of the MAX! Wall Ther-
mostat by pressing and holding down the OK button of
the MAX! Wall Thermostat.
• Now activate teach-in mode on the radiator thermostat.
36
) is displayed, along with