Installation - Velleman CAMIP16 Schnelleinstieg

 DO NOT use this product to violate privacy laws or perform other illegal
activities.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 lens
2 sun shield
3 vandal-proof bracket
4 bracket screw holes
5 camera front cover
6 focal length screw
7 focus screw
8 desiccant
9 sun shield installation
10 microSD card
11 PC
12 PoE router/hub
13 8P8C network cable
14 8P8C network cable
15 power
5.

Installation

1. Choose a location for the camera, keeping following guidelines in mind:
o Do not install the camera in locations where extremely high or low
temperatures or excessive vibrations may occur.
o Avoid mounting the camera near high electro-magnetic fields.
o Do not aim the camera at the sun or other extremely bright objects
or reflections (e.g. metal doors).
2. Use the mounting bracket [3] to determine the location of the
mounting holes. Drill the holes and secure the bracket using
3 screws [4].
3. Point the camera towards the field of interest [28a, 28b, 28c].
V. 02 – 10/12/2014
CAMIP16
16 PC
17 non-PoE router/hub
18 8P8C network cable
19 PoE injector
20 8P8C network cable
21 power
22 NVR
23 LAN SWITCH connector
24 8P8C network cable
25 router/hub
26 8P8C network cable
27 cameras
28a horizontal adjustment
28b vertical adjustment
28c rotational adjustment
6 ©Velleman nv