Intended Use; Technical Description - Dometic Smart D Montage- Und Bedienungsanleitung

Dometic Smart D
4

Intended use

Dometic Smart D is a system consisting of several devices and takes on the
control and display of electrical components in motor homes and camper
vans.
5

Technical description

An example installation is shown in fig. 2, page 3.
Dometic Smart D consists of the following main components:
 Dometic Smart D Control Panel
 Dometic Smart D I/O Main Unit
 Dometic Smart D I/O Cards with six inputs and outputs
 Dometic Smart D RS232 CI Converter
The system's communication uses the CI-Bus (Caravan Industrial Bus)
The I/O modules are installed in the vehicle. The following are connected to
these:
 analogue devices such as pumps or lamps
 digital devices such as sensors
It is possible switch on selected connected devices or to manage them using
buttons connected to the I/O cards. Using the I/O main unit the connected
230 V mains voltage can be distributed centrally within the vehicle, e.g. at
camp sites.
The system is operated and settings made via the control panel. The central
control element of the system is a 7"touch screen via which menus can be
called up with functions for setting.
The control panel can be used for the specific activation of individual compo-
nents as well as for the presentation of status reports and operating states,
e.g. tank level, battery status, temperatures etc.
EN
Intended use
41