ecofort ATF301 Betriebsanleitung Seite 7

Above the floor cleaning
For above the floor cleaning you can fit the
crevice tool or dusting brush for close-to work...
Removing and cleaning the brush bar
Before you remove the brush bar, you will
need to remove the power floor head from
the extension tube. Rotate the latch on
the side of the powered floor head to the
'unlock' position and pull out the brush bar.
...or fit the extension tube with an
accessory for high-up cleaning.
To remove hair from the brush bar, run an
open pair of scissors down the groove to
cut the hair, then pull it out.
Never operate the power floor head without
the brush bar in.
ENGLISH
7