switel D8555 Bedienungsanleitung Seite 159

- Telephone Answering Machine -
14.9.2 Changing the remote access security code
Proceed as follows to change the security code:
c or d,
c or d,
c or d,
14.9.3 Playing back messages via remote access
M
*, M
If the security code is entered incorrectly three times, the line is
automatically disconnected.
2
Other functions can be executed via the remote access system
within the following 10 seconds. Refer to the table in Chapter
14.9.4.
Replace receiver
14.9.4 Function keys for remote access
The functions assigned to the buttons are dependent on the mode currently
activated. The following table provides an overview of the respective
functions assigned to the individual buttons.
Button
1
1 twice
2
3
4
5
6
7
Functions
Play back current message again
Play back previous message
Playback message / Pause in playback
Play back next message
Playback outgoing message currently set
Record outgoing message (select required outgoing
message mode beforehand with 9)
Stop
Delete
Press the button on the
underside of the base station
for 2 seconds
Change 1st digit and confirm
Change 2nd digit and confirm
Change 3rd digit and confirm
Dial your own phone number
Press during the outgoing
message and enter the security
code
Play back message
End remote access
159