Removing And Replacing The Lid And Seat - Dometic Saneo series Bedienungsanleitung

Maintenance
5.12

Removing and replacing the lid and seat

I
NOTE
The manufacturer accepts no liability for damage resulting from
incorrect or faulty installation.
Proceed as follows (fig. q, page 41):
➤ Loosen the spacer (2) by prying it out of its position with a screwdriver.
➤ Use a screwdriver to carefully pry the lid (1) out of its mounting and
remove it.
➤ If necessary, remove the components of the Autoclose with the markings
"CW" and "CCW".
➤ Lift the lid.
➤ Use both hands to grasp the lid above the hinges (3) and bend it slightly
toward the bowl to detach it.
➤ Lift the seat.
➤ Use both hands to grasp the seat above the hinges (3) and bend it slightly
toward the bowl to detach it.
40
Saneo B, Saneo C
EN