Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
The part reference "B-TC026Y ; B-TC026YA" includes the following (Ref. to Fig. 1):
– Basic tool complete with battery
51
82
– Shoulder strap
– Spare battery
– Battery charger
– Carrying case type "VAL P9"
2. INSTRUCTIONS FOR USE
(Ref. to Fig. 2)
The tool can be easily carried using either the handle or the shoulder strap attached to
the rings (R).
2.1) Setting
46
41
Insert the conductor between the blades, up to the desired cutting point.
For a running conductor, release the latch (66) and open the tool head.
42
Fully retract the lower blade (51) before attempting to open the tool head.
With the conductor on the lower blade (51), close the tool head and fully secure the latch
40
(66).
Before commencing the cutting operation ensure that the latch (66) is fully secured:
partial closure may damage the tool head.
42
2.2) Blade advancement
40
Operate push-button (06) to activate the motor-pump group for the advancement of the
lower blade. To halt the advancement, release the push-button (06) and the motor will
cut out.
2.3) Cutting
Continue operating the push-button (06) to gradually move the lower blade to cut through
the cable.
The motor will continue to operate after the maximum pressure relief valve has activated.
No further cutting force is applied, the oil is bypassed and returned to the reservoir.
48
2.4) Blade retraction
48
By pressing the pressure release button (201) on the body of the tool below push-button
(06), the ram will retract, opening the blades.
50
04
47
38
52
37
03
36
34
35
33
63
43
44
45
43
44
45
200
41
205
42
41
49
39
47
42
41
201
66
08
61
30
02
74
75
67
72
13
56
55
45
54
12
57
78
57
58
65
79
59
77
3
32
22
23
19
17
72
53
72
53
203
204
53
72
53
32
71
47
29
47
68
69
76
80
64
58
59
60
60
16
70
18
70
18
70
18
70
18
21
11
23
20
26
202
73
14
05
15
EXP0966 Rev. 1 27-05-2013
Werbung
Inhaltsverzeichnis
