Buttner Elektronik MT iQ Solar Pro Bedienungsanleitung Seite 26

Now plug the current sensor into the connector of the
extension cord unti l it snaps in audibly.
EN
Please now connect the two power supply cables at the
socket of the data cable with the batt ery terminals. Red cable
on plus and blue cable on minus terminal of the batt ery.
Reconnect the pole terminals with the batt ery posts.
At next, connect the other end of the data cable to the
according socket on the back-side of the solar remote display.
Note
i
i
26
Extension cable
In case the data cable included in the packaging
is too short, it can be extended with the extension
cable MT01217.
Aft er wiring is fi nished, check again the correct
installati on positi on of the sensor. With a parti ally
charged batt ery and at present solar radiati on, the
fl owing current value must be positi ve. Otherwise
please turn the current sensor.
BÜTTNER ELEKTRONIK – MT iQ Solar
Pro