LG F14WM series Bedienungsanleitung Seite 39

Symptoms
Water supply is not adequate in
that location.
Water supply tap is not
Water does not
completely open.
enter washing
machine or it enters
Water supply hose(s) are
slowly
kinked.
The filter of the supply hose(s)
clogged.
Water in the Drain hose is kinked or
washing machine clogged.
does not drain or
The drain filter is clogged.
drains slowly
Electrical power cord may not
be plugged in or connection
may be loose.
Washing machine House fuse blown, circuit
does not start breaker tripped,or a power
outage has occurred.
Water supply tap is not turned
on.
Washing machine Check that the door is firmly
will not spin shut.
38
Reason
• Check another tap in the house.
• Fully open tap.
• Straighten hose.
• Check the filter of the supply hose.
• Clean and straighten the drain hose.
• Clean the drain filter.
• Make sure plug fits tightly in wall outlet.
• Reset circuit breaker or replace fuse.
Do not increase fuse capacity. If
problem is a circuit overload, have it
corrected by a qualified electrician.
• Turn on water supply tap.
• Close the door and press the Start/
Pause button. After pressing the
Start/Pause button, it may take a few
moments before the washing machine
begins to spin. The door must be
locked before spin can be achieved.
Add 1 or 2 similar items to help balance
the load. Rearrange load to allow
proper spinning.
EN
Solution