Transportation And Changing Of Installation Position; Changing Of Door Opening Direction; Before Calling Your After Sales Service - Nordmende RFF331WHA+ Bedienungsanleitung

PART 5.

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope. The
rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old installation position, all the moving objects (i.e.,
shelves, crisper...) should be taken out or fixed with bands in order to prevent the
shake.

Changing of Door Opening Direction

In case you need to change door-opening direction, please consult the domestic after
sales service.
PART 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power, (Green lamp is off)
• The general switch in your home is disconnected ,
• The thermostat setting is on« 0 »position ,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your appliance performs poorly;(Red lamp is on)
Check that;
• You have overloaded the appliance ,
• The thermostat setting is "1" position (if so set the thermostat dial suitable value)
• The doors are closed perfectly ,
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
EN - 12 -
(Only some models)