EN
3.
The manufacturing company holds the proprietary rights to the technical documentation attached to the machine and furthermore
prohibits its reproduction or translation, whether partial or in its entirety, without prior written authorization.
4.
5.
17
MANUFACTURER'S INFORMATION
INFORMATIONAL PLAQUES
The information concerning the model and its characteristics can be found by
consulting the tag located on the appliance.
ELLECI Spa
Via Migliara 53 z.i. Mazzocchio
04014 PONTINIA - LT - ITALY
Tel . +39(0) 773 - 840036
Fax . +39(0) 773 - 840038
ATTENTION
All installation, calibration, and maintenance procedures must be carried out by
qualified professionals in accordance with this Instruction Manual and accor-
ding to existing laws.
SMEG Spa will be not held responsible for improper installation, calibration and
maintenance of the device.
Before carrying out any maintenance operation, turn off the power and close the
water supply to the device.
In the case of substitution of parts and/or accessories, only original SMEG Spa
spare parts should be used.
Do not open the casings and external coverings of electrical devices.
Periodically have the condition of the plumbing connection and drains inspected
by qualified personnel. Replace piping and accessories at the least sign of alte-
ration and/or leaks.
PRODUCER:
Elleci S.p.A., Strada Longitudinale A 1258, Z.I. Mazzocchio
04014 Pontinia (LT) - Italy
Tel. +39.0773.840036
Fax. +39.0773.840038
elleci@elleci.it
SAFETY
DANGER OF ELECTROCUTION
wATER PIPES AND DRAINS