Clas Ohlson MS6812 Bedienungsanleitung Seite 5

Note: The boundary
wire is divided into
two sections (A and
B) at the point where
the guide wire (C) is
connected to it.
In this example,
the boundary wire
system is not equipped
with a guide wire.
Fault finding on a system with a guide wire
To find which section of the boundary wire/guide wire has a fault in it, do as
follows:
1. First check that the charging station is indicating an error. Refer to the
instruction manual for your robotic lawnmower system if you are unsure.
2. Disconnect the cables from the connections on the charging station.
Make a note of how the cables were connected. Some charging
stations have connections where the cables are connected directly using
spring clamps. Other charging stations use cable terminals.
Garage
Charging station
Residence
Garage
Charging station
Residence
5
Driveway
Driveway