Samsung HW-K850 Bedienungsanleitung Seite 11

SOUND SOURCE
EFFECT LEVEL
VOL WOOFER
SOUNDBAR
+ Controlling the Volume of Soundbar by using your tV remote Control
1. Press and hold the
2. "on - TV remoTe" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
● not available in tV arC, Bt, HDMi1 and HDMi2 modes. (available only in D.in (optical) and aUX
modes)
● on the TV remote control, only the volume and mute buttons are available. other buttons are disabled.
● TV menus differ by manufacturer and model. refer to the TV's user manual for further information.
● manufacturers supporting this function:
- VIZIo, LG, Sony, Sharp, PHILIPS, PanaSonIC, ToSHIBa, GrUnDIG, Hisense, rCa
- This function may not be compatible with your TV's remote depending on the remote control's manufacturer.
● To turn off this function, press the
"off - TV remoTe" appears on the Soundbar's display.
(Sound Control)
Press to select treBLe, BaSS, or aUDiO SynC. Then, use the
Up/Down buttons to adjust the treBLe or BaSS volume from -3 ~ +3.
Press and hold the
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, and 10KHz are selectable (Left/right) and each can be
adjusted to a setting between -6 ~ +6 (Up/Down).
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the
with the video. Use the Up/Down buttons to set the audio delay between
0 ms ~ 300 ms. In BT mode, the audio Sync function may not available.
WOOfer
Push the button up or down to adjust the volume of the subwoofer to -12 or
-6 to +6.
Pressing the button reverts the subwoofer volume to level 0.
VOL
Push the button up or down to adjust the volume.
Mute
Press the VOL button to mute the sound. Press it again to unmute the sound.
SOUnD button for more than 5 seconds while the Soundbar is turned on.
SOUnD button for 5 seconds.
(Sound Control) button for about 5 seconds to
(Sound Control) button to sync the audio
11
DESCRIPTIONS