Do You Want To Operate The Plant According To The Time Switch - Siemens Synco 700 RMS705 Bedienungsanleitung

Do you want to operate the plant according to the time switch?

If a time switch, e.g. Time switch 1, is configured in your
RMS705, the plant will be switched according to the
selected time program.
If, in addition to the time switch a
[Time switch n] op selector is configured, the latter must be
set to Auto for the plant to be switched according to the
selected time program.
If a [Time switch n] op selector is available and you do not
want to control the plant according to the time program
(that is, not automatically), you can override it manually
with [Time switch n] op selector, either with On or Off.
Path:
If you want to set the plant to On or Off for a limited period of time only, do not forget to return to Auto in due time!
Building Technologies / HVAC Products
Welcome > Main menu > [Time switch 1] op selector > Preselection:
Example of a time program:
Time switch 1
Saturday
From 06:00 switched on - from 22:00 switched off
Note:
The time switch settings are described on
CE1B3123x2-en
page 12.
74 319 0503 0 a
11
06.04.2006