LENCO DVT-1541 Bedienungsanleitung Seite 23

TV Function
Channel Name
Press the ▲▼ button to select the Channel Name and press the ENTER button to enter. Then
press the ▲▼ button to select letters or press the number button to enter numbers. Press the
MENU button to return to the previous menu.
Skip
Press the ▲▼ button to select Skip and press the ENTER button to activate or cancel this function.
Press the MENU button to return to the previous menu.
Swap
Press the ▲▼ button to select Swap from Ch and press the ENTER button to enter. Press the
number buttons to select program number. Repeat the above operations to Swap To Ch Then
Press the ▲▼ button to select Perform Swap and press the ENTER button to confirm.
Manual Install
Press the ▲▼ button to select
the Manual Install and press the
ENTER button to enter the menu
shown on the right.
In the Manual Install setup
menu, press the ▲▼ button to
select the desired item. Press
the MENU button to return to the
previous menu.
Search
Press the ▲▼ button to select Search and press the ► or ◄ button to start searching forward or
backward. Press the MENU button to return to the previous menu.
- 22 -