Setting The Mowing Times; Edge Mowing With A Manual Start; Setting The Secondary Area Mowing - Kärcher RLM 4 Betriebsanleitung

Manually specifying entry points (01)
The first entry point (01/X0) is preset and is 1 m
to right of the charging station. Up to 3 other en-
try points (X1 to X3) can be programmed behind
this point. When specifying the entry points, heed
the following:
■
Do not set entry points too far from the
charging station or too close to one anoth-
er (02/f).
■
Only use as many entry points as necessary.
* Entry Point
1. or
* Point X1 at [020m]
2. or
Select one digit in sequence with
and always accept with
* Point X2 at [075m]
3. or
Select one digit in sequence with
and always accept with
4. If necessary, specify further entry points.
5. Return to the main menu with
7.5.3

Setting the mowing times

NOTE
There must be at least 30 min. between
programming the mowing times and the
mowing start. If not, the appliance only
starts at the next programmed mowing
time.
In the Weekly Program menu item, the days of
the week and time periods when the appliance
should mow are set. Adapt these settings to the
size of your garden if necessary. If unmown ar-
eas are still visible after approx. one week, in-
crease the mowing periods.
* Weekly Program
1. or
■
* All Days [X]: The appli-
or
ance mows every day at the set times. If
All Days [ ] is shown, the appliance
only mows on the set days of the week.
■
* Monday [X]...* Sunday
or
[X]: The appliance mows for the set
time periods on the set day of the week.
If Monday [ ] is shown, for example,
the appliance does not mow on the re-
spective day.
457462_b
or
.
or
.
.
GB
■
Change
or
deactivate [ ] the respective day and
set the time periods, type of mowing and
the entry points.
2. Make the settings for every day or the re-
spective day:
■
e.g. *[M] 07:00-10:00 [?]: Normal
mowing [M] from 7 am – 10 am with au-
tomatically changing entry point 0 – 3
[?].
■
e.g. *[R] 16:00-18:00 [1]: The ap-
pliance starts with edge mowing [R] at 4
pm and moves along the entire boundary
cable. The area mowing then begins at
entry point 1 [1]. At 6 pm or as soon as
the rechargeable battery is discharged,
the appliance moves back to the
charging station.
■
Change
or
lected setting.
■
Continue
or
changes setting and continue to the next
setting.
Save
3. or
tings of the menu item.
7.6

Edge mowing with a manual start

For a manual start, the setting can be made here
that the appliance begins with edge mowing.
Carrying out the edge mowing at the pro-
grammed mowing time periods: see chapter 7.5.3
"Setting the mowing times", page 55.
* Margin mowing
1. or
* at manual start
2. or
7.7

Setting the secondary area mowing

* Sub zone mowing
1. or
2. Setting the mowing time periods:
■
inactive
or
Secondary area mowing is switched off.
■
active
or
The appliance mows until the recharge-
able battery is flat.
■
Mowing time in min
or
The appliance mows the secondary area
for the set time period. The following
mowing time periods can be set:
15/30/until rechargeable battery flat.
: Activate [X] or
: Change the se-
: Confirm the
: Save all changed set-
:
:
:
55