Remote Controller; Operation Section - Mitsubishi Electric PFAV-P500VM-E Bedienungshandbuch

Remote Controller

Display Section
[Fig. 2.1]
For purposes of this explanation,
all parts of the display are shown
as lit. During actual operation,
only the relevant items will be lit.
A Identifies the current operation
B "Centrally Controlled" indicator
C "Timer Is Off" indicator
D Temperature Setting

Operation Section

[Fig. 2.2]
Set Temperature buttons
A
Down
Up
Timer Menu button
B
(Monitor/Set button)
Mode button (Return button)
C
D Set Time buttons
Back
Ahead
Timer On/Off button
E
(Set Day button)
N
Opening the door.
Note:
 If you press a button for a feature that is not installed at the indoor unit, the remote controller will display the "Not Available" message.
If you are using the remote controller to drive multiple indoor units, this message will appear only if the feature is not present at the main unit.
2
E Day-of-Week
F Time/Timer Display
TIME SUN MON TUE WED THU FRI SAT
TIMER
AFTER
ERROR CODE
°F°C
ONLY1Hr.
G Up/Down Air Direction indicator
H
"One Hour Only" indicator
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
CLOCK
PAR-21MAA
Hr ON
AFTER OFF
FUNCTION
°F°C
FILTER
WEEKLY
SIMPLE
AUTO OFF
I Room Temperature display
J
Louver display
K (Power On indicator)
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
L "Sensor" indication
M "Locked" indicator
N "Clean The Filter" indicator
O Timer indicators
P Fan Speed indicator
Q Ventilation indicator
F
ON/OFF button
G
Fan Speed button
H
Filter button
(<Enter> button)
I
Test Run button
J
Check button (Clear button)
K
Airflow Up/Down button
L
Louver button
( Operation button)
To preceding operation
number.
M
Ventilation button
( Operation button)
To next operation number.