Changing The Tool - Bosch PMF 180 E Multi Originalbetriebsanleitung

Assembly

Changing the Tool

Before any work on the machine itself, pull
the mains plug.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found
in the extensive Bosch accessories program.
Accessory
BIM segment
saw blade
Base plate for
sanding, series
Delta 93 mm
HCS plunge
cut saw blade,
wood
HCS plunge
cut saw
blades, wood
BIM plunge
cut saw
blades, metal
HM-Riff
segment saw
blade
Bosch Power Tools
Material
Wooden materials,
plastic, non-ferrous
metals
Depends on sanding
sheet
Wooden materials,
soft plastics
Wooden materials,
soft plastics
Metal (e.g., nails,
screws, small pro-
files), non-ferrous
metals
Grouting joints, soft
wall tiles, glass-fi-
bre reinforces plas-
tic and other abra-
sive materials
Wear protective gloves when changing
application tools/accessories. Contact
with the application tool/accessoriy can
lead to injuries.
Application
Separating and plunge cuts; also for sawing
close to edges, in corners and hard to reach
areas;
Example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Sanding surfaces close to edges, in corners
or hard to reach areas;
Depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, stone
Separating and deep plunge cuts; also for
sawing close to edges, in corners and hard
to reach areas;
Example: narrow plunge cut in solid wood
for installing a ventilation grid
Smaller separating and plunge cuts;
Example: Cut-outs in furniture for cable
connections
Smaller separating and plunge cuts;
Example: Shortening narrow profiles, cutting
fastening elements such as staples
Cutting and separating close to edges, in
corners or hard to reach areas;
Example: Removing grouting joints between
wall tiles for repair work, cutting openings in
tiles, gypsum boards or plastic
English | 17
2 609 000 229 | (19.1.09)