Connecting The Receiver - Amplicomms V130 Bedienungsanleitung

The transmitter is operated by means of 4 AAA Alkaline batteries (not
contained in the material supplied). The transmitter cannot be charged.
Insert the batteries before connecting the power adapter plug.
In the case of a low battery charge, the Power LED flashes slowly. The batte-
ries must be replaced.
Operating with a power adapter plug
Connect the transmitter as illustrated in the diagram. For safety reasons,
only use the power adapter plug supplied.
Mains power outlet

Connecting the receiver

Attention: Position the receiver with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk of mutual disturbance.
Operating with a power adapter plug
Connect the receiver as illustrated in the diagram. For safety reasons, only
use the power adapter plug supplied.
Mains power outlet
P
UTTING THE
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
U O
NITS INTO
LINK
PERATION
29