Charging The Rechargeable Battery; Operating; Power On/Off; Freezing The Image - Wohler VE 400 Bedienungsanleitung

Operating

5.3 Charging the recharge-
able battery
6 Operating
6.1

Power on/off

6.2

Freezing the image

6.3

Rotating an image

6.4 Probe viewing angle (Ø
5.5 mm only)
Fig. 17: Ø 5.5 mm probe Wöhler VE 400;
the arrow indicates the switch to change
the viewing angle.
28
The battery symbol on the top right of the display
indicates the charge status of the rechargeable
battery.
• To charge the videoscope connect the power
pack, included in the scope of supply, to the
USB port on the bottom of the device.
Connect the power pack to the mains.
The On/Off key flashes red (Fig. 1, position 1)
while the battery is being charged.
The Wöhler VE 400 remains ready for operation
throughout the charging process.
• To power the device on/off press and hold the
On/Off key (1) for approx. 2 seconds.
The start screen is displayed after 3 seconds,
followed immediately by the live camera image.
• To freeze an image, press the OK key.
• To return to the normal image mode, press the
OK key again.
To rotate an image 90° in the display, press
•
the arrow up key.
Press the black switch on the probe connec-
•
tion to change the viewing angle of the probe
from 0° to 90° side view.