Assign An Ip Address - Axis P3346-VE Installationsanleitung

AXIS P33-VE Series Network Camera Installation Guide

Assign an IP address

The AXIS P3346-VE/P3367-VE/P3384-VE Network Camera is designed for use on an Ethernet
network and requires an IP address for access. Most networks today have a DHCP server that
automatically assigns IP addresses to connected devices. If your network does not have a DHCP
server, the AXIS P3346-VE/P3367-VE/P3384-VE Network Camera will use 192.168.0.90 as the
default IP address.
AXIS IP Utility and AXIS Camera Management are the recommended methods for setting an IP
address in Windows. These free applications are available on the Axis Network Video Product CD
supplied with this product, or they can be downloaded from www.axis.com/techsup Depending on
the number of cameras you wish to install, use the method that suits you best.
Method
AXIS IP Utility
See page 12
AXIS Camera Management
See page 13
Notes:
• If you are unable to set the IP address, check for any firewall blocking the operation.
• See page 19 for other available methods for setting or discovering the IP address of the AXIS
P3346-VE/P3367-VE/P3384-VE Network Camera, in relation to other operating systems.
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
Page 11
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7