Truma DuoC Einbauanweisung Seite 9

A suitable rubber bushing or vehicle body sealant must be
used for the cable lead-through in the cylinder box. Ensure
the lead-through is at least 50 cm above the bottom of the
cylinder box.
If necessary, secure the cables to e.g. the gas pipe with cable
ties or similar, in order to prevent chafing.
Installation example
DuoControl vertical / DuoControl CS vertical
Figure 1
5 0 c m
Installation example
DuoControl horizontal / DuoControl CS horizontal
5 0 c m
Figure 2
EN 9