Safety Advice - Resol FriwaMaster Handbuch

FriwaMaster

Safety advice

Please pay attention to the following
safety advice in order to avoid danger
and damage to people and property.
Instructions
Attention should be paid to
- valid local regulations
- the statutory provisions for preven-
tion of industrial accidents,
- the statutory provisions for environ-
mental protection,
- the Health and Safety at Work Act
1974
- Part P of the Building Regulations
2005
- BS7671 Requirements for electrical
installations and relevant safety re-
gulations of DIN, EN, DVGW, TRGI,
TRF and VDE.
These instructions are exclusively
addressed to authorised skilled per-
sonnel.
- Only qualified electricians should
carry out electrical works.
- Initial installation must be effected
by qualified personnel named by the
manufacturer
Appropriate usage
The FriwaMaster is to be used in
systems with several DHW heat
exchange modules and is used for
switching on or off these modules
accor ding to demand in compliance
with the technical data specified in
these instructions.
Improper use excludes all liability
claims.
Subject to technical change. Errors
excepted.
16
|
Table of contents
Safety advice ........................................................................................... 16
Technical data and functional overview ............................................... 17
1. Hydaulic scheme............................................................................... 18
1.1 Description ................................................................................................18
1.2 Valve logics ................................................................................................19
2. Installation ......................................................................................... 19
2.1 Mounting ....................................................................................................19
2.2 Electrical connection ............................................................... 20
2.2.1 Overview of electrical ...........................................................................20
2.2.2 Sensors .......................................................................................................20
2.2.3 Relay outputs ............................................................................................21
2.2.4 Data transfer / bus ...................................................................................21
2.2.5 Mains supply .............................................................................................21
3. Operation .......................................................................................... 22
3.1 Buttons for adjustment ...........................................................................22
3.2 Control lamp .............................................................................................22
3.3 User code ..................................................................................................22
3.4 Menu structure .........................................................................................23
4. Functions and options ...................................................................... 24
4.1 Measured values ...................................................................................... 24
4.2 Balance values .......................................................................................... 24
4.3 Return connection option .....................................................................25
4.4 Error relay option ....................................................................................26
4.5 Module 1-4 option ...................................................................................26
4.6 Function R5 ...............................................................................................26
4.7 Manual operation .....................................................................................26
4.8. Language choice .......................................................................................27
4.9 Switching points .......................................................................................27
4.10 Factory setting ..........................................................................................27
5. Overview of functions and options ..............................................................28
Imprint .............................................................................................. 26
Declaration of conformity
We, RESOL Elektronische Regelungen GmbH, D-45527 Hattingen, declare un-
der our sole responsibility that our product FriwaMaster complies with the
following standards:
EN 60730-1:2005
EN 60730-2-9:2005
According to the regulations of the above directives, the product is labelled with
:
2004/108/EC
2006/95/EC
Hattingen, 07.04.2007
RESOL Elektronische Regelungen GmbH,
ppa. Gerald Neuse