Specific Safety Rules - Bosch 0 607 160 502 Bedienungsanleitung

Disconnect the air hose from the air supply before
making any adjustments, changing accessories,
or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Store idle air tools out of the reach of children and
do not allow persons unfamiliar with the air tool or
these instructions to operate the air tool. Air tools
are dangerous in the hands of untrained users.
Maintain air tools. Check for misalignment or
binding of moving parts, breakage of parts, and
any other condition that may affect the operation
of the air tool. If damaged, have the air tool re-
paired before use. Many accidents are caused by
poorly maintained air tools.
Avoid contact with a live wire. The
tool is not insulated and contact with
a live wire may result in electric shock.
Use a suitable locating device to detect hidden
electrical wiring or consult your local utility com-
pany. Contact with live wires may result in fire and
electric shock. Damage to a gas pipe may result in an
explosion. Penetration of a water pipe causes physi-
cal damage.
Disconnect all fuses or circuit breakers that feed
the work area before you drill, cut, or attach any-
thing in this area. This eliminates the danger of elec-
tric shock.
Hold the tool securely and place your body and
your arms in a position that withstands recoil
forces. Recoil forces may result when the tool bit
jams or catches. When this occurs, the motor stalls,
preventing damage to the tool.
Immediately switch off the tool when the tool bit
binds. Be prepared for high reaction torques
that cause recoil. The tool bit binds when:
– the tool is overloaded,
– it twists in the material being worked, or
– its tip penetrates the material being worked.
3 609 929 937 • (03.10) T

2 SPECIFIC SAFETY RULES

FOR DRILLS
English–2
Keep the tool bits clean. Well cared for tool bits are
easier to use and can be controlled better.
Use the air tool, accessories, and tool bits, etc.,
in accordance with these instructions and in the
manner intended for the particular type of air
tool, taking into account the working conditions
and the work to be performed. Use of the air tool
for operations different from those intended could re-
sult in a hazardous situation.
Service
Have your air tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the air tool is maintained.
Type 0 607 160 509 / ... 511
If the tool bit jams in the workpiece, reverse the direc-
tion of rotation and start the tool slowly to release the
tool bit from the workpiece.
Use only flawless tool bits that are not worn. De-
fective tool bits can break, for example, and cause in-
jury or damage.
Take care when inserting a tool bit that the shaft
of the tool bit is seated firmly in the tool holder.
When the shaft of the tool bit is not inserted deeply
enough in the tool holder, the tool bit can slide out and
no longer be controlled.
Do not run the tool while carrying it at your side.
A rotating bit could become entangled with clothing
and injury may result.
If you wish to operate the tool in a suspension or
clamping device, make sure that the tool is first
mounted in the device before you connect it to
the air supply. In this way you avoid starting the tool
accidentally.
Regularly check the condition of the hanging hoop and
the hook of the suspension device.