Before Using The Appliance For The First Time - ROWENTA INTENSE PURE AIR PU4020F0 Bedienungsanleitung

RO_PU4020FU_PU6020FO_903452_MISE EN PAGE 25/09/14 09:30 Page14
« HOW TO ACHIEVE CLEANER INDOOR AIR »
In addition to using your Intense Pure Air purifier, here are some tips on how to
improve the quality of your indoor air:
• Ventilate the rooms for at least 10 min. every day, in summer and winter
• Maintain your ventilation system
• Limit the use of household products
• Do not smoke indoors
• Avoid home fragrances, incense sticks, scented candles, etc.
• Ventilate whenever any work is being conducted in your home and for several weeks
afterwards
• Avoid green plants that are allergenic or need frequent watering
WHERE TO INSTALL THE APPLIANCE
Place the purifier on a flat, stable surface in the room requiring treatment.
To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item
of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each
side of the appliance.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Make sure that the plastic packaging protecting the filters has been removed before using the
appliance.
Also make sure that:
• The voltage of your electrical installation corresponds to the one indicated on the appliance.
Your appliance can be used with a power plug without an earth connection. It is a class II appliance
(double electrical insulation),
• The appliance is positioned in the house as described above,
• The air inlet and outlet grids are completely unobstructed,
• Ensure the 4 filters and front panel have been correctly installed (see section titled filter
assembly/dismantling paragraph).
This appliance is fitted with a device that automatically prevents it from operating if the front door is
not correctly assembled.
Inserting and replacing the filters
This appliance is equipped with 4 types of filters:
Pre-filter
NB: For optimum performance of the appliance, only use filters provided by ROWENTA.
To replace the filters, follow the instructions in the section « Disassembling/Reassembling filters ».
14
Active carbon
filter
HEPA filter NanoCaptur
filter