Changing The Blade; Storage; Disposal /Enviromental Protection; Replacement Parts/Accessories - Grizzly ERM 1333 G Originalbetriebsanleitung

• Check the covers and protective de-
vices for damage and check that they
are sitting correctly. Replace them if
necessary.

Changing the Blade

If the blade is blunt, it can be sharpened
by a specialist workshop. If the blade
is damaged or showing signs of imbal-
ance, it must be replaced (see chapter on
"Spare Parts").
1. Turn the equipment over.
2. Use sturdy gloves and hold the
blade (19) firmly. Turn the blade
screw (20) anticlockwise off of
the motor spindle (21) using a
screwdriver.
3. Install the new blade (19) in the
reverse order. Ensure that the
blade is positioned correctly and
the screw (20) tightened firmly.

Storage

In order to ensure that the device
takes up less space, unlock the
clamping lever (2) and fold down
the bow-type handle (1). Make
sure that the cable of the device
(11) is not pinched.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Disposal /Enviromental
Protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center. Be environ-
mentally friendly. Return the tool, acces-
sories and packaging to a recycling
when you have finished with them.
Machines do not belong with do-
mestic waste.
The plastic and metal parts employed can
be separated out and thus recycled use
can be implemented. Ask our Service-
Center for details.
Defective units returned to us will be dis-
posed of for free.
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see "Grizzly
Service-Center"). Please have the order
number mentioned below ready.
Blade assembly ........................ 13700214
Grass collecting box assembly . 91104001
Fast clamping knob .................. 91104002
Switchbox ................................ 91104003
GB
centre
39