Operation - Parkside PHLG 2000 C2 Originalbetriebsanleitung

Always remove the plug from the
■
power socket during work breaks,
when adjusting the appliance (e.g.
changing nozzles) and when it is
no longer in use.
Keep the nozzle at a distance from
■
the workpiece or the area being
processed. A build-up of hot air can
result in damage to the appliance.
Pay close attention to the area being
■
worked and also the surrounding
area. The heat can reach combust-
ible parts outside your field of vision.
The appliance must always be kept
■
clean, dry and free from oil or
grease.
Never use the appliance for pur-
■
poses other than the ones for which
it was designed.
PHLG 2000 C2

Operation

Operation
CAUTION!
► Do not cover the ventilation slots during use.
CAUTION!
RISK OF BURNS!
► Do not touch the hot nozzle.
Switching the appliance on:
■ Move the ON/OFF switch
position.
Switching the appliance off:
■ Move the ON/OFF switch
tion.
Setting airflow and temperature:
You can use the temperature and air flow control
to select between two different blower levels.
Depending on the application, you can select the
most suitable airflow and temperature:
Level I approx.
300 l/min.
Level II approx.
500 l/min.
Use as a free-standing appliance/cooling
(see fig. A):
■ Place the appliance upright on a level surface
–
to have both hands free to work.
–
or to allow the appliance to cool down.
GB
MT
into the "I" or "II"
to the "0" posi-
approx.
350°C
approx.
550°C
29