Operating The Chainsaw; Switching On; Checking The Chain Brake - FLORABEST FKS 2200 G4 Originalbetriebsanleitung

G B
M T
C
up with chain oil.
2
close the cap (2) again.
Always switch off the device
and allow the motor to cool
before filling with chain oil.
There is a risk of fire if oil
overflows.

Operating the chainsaw

Switch on the chainsaw only when
chain bar, saw chain and sprocket
chain wheel covering are correctly
mains connection agrees with the
label on the device. Make sure you
have a secure stance. Make sure be-
saw is not touching anything.
Caution! Saw can oil up, see notes
on "Assembly - Mounting the saw
chain and blade"

Switching on

D
(see Chapter Operation Startup).
2
extension cable and hang this
rear grip (1).
3. Connect the device to the mains
voltage.
4. Release the chain brake, where
5
with both hands, with the right
4 4
2

Checking the chain brake

E
-
3
6
hand on the rear grip (1) and
6
close securely over the handles.
6. For switching on, activate the
switch-on block (14) with the right
switch (13), the electric power saw
runs with highest speed. Release
the switch-on block (14) again.
3
ous running is not possible.
chain brake has engaged. Do not
employ the chain brake in order to
1. Place the electric chainsaw onto
contact any objects.
2. Connect the device to the mains
voltage.
3. Release the chain brake by
with both hands, with the right
hand on the rear handle (1) and
6
close securely over the handles.
5. Turn on the electric chainsaw.
6. Activate the chain braking lever
(3), with running motor, with
3
handle (16). Chain should stop
abruptly.
-
3
6