Auriol Z31130 Bedienungs- Und Sicherheitshinweise Seite 21

5. Confirm your setting by pressing the MODE button. The hour value of the time
display flashes. Press the + or – button to set the desired value.
Note: The time and date settings will be done automatically if the weather
station receives the DCF signal. You should manually adjust the time and date
if you have no reception of DCF.
Tip: Hold the + or – button pressed down. This will speed up the process of
setting the values. You can also use this fast setting option for subsequent settings.
If you do not press any button for 20 seconds, the LCD automatically reverts to
the standard display.
6. Confirm your setting by pressing the MODE button. The minute indicator of the
time display blinks. Press the + or – button to set the desired value.
7. Confirm your setting by pressing the MODE button. The year indicator flashes
in the time display. Press the + or – button to set the desired value.
8. Confirm your setting by pressing the MODE button. The month indicator flashes
in the date display
9. Confirm your setting by pressing the MODE button. The day indicator flashes
in the date display. Press the + or – button to set the desired value.
10. Confirm your setting by pressing the MODE button. At the place of the day of
the week display
or – button to choose the desired language.
Note: You have the choice of German (GE), English (EN), Italian (IT), French
(FR) and Spanish (ES) (German is set as the standard language).
11. Confirm your setting by pressing the MODE button.
85059_aur_DCF-Wetterstation_Content_LB7.indd 21
. Press the + or – button to set the desired value.
1
, the language indicator of this display flashes. Press the +
9
GB/CY 21
02.01.13 07:18