GB
•
Lock / unlock the switch-on lever
D
of the gun (10) by depressing
the locking lever (15).
Lock the switch-on lever to prevent
the pressure washer from being in-
advertently/accidentally started.
Locked
Open
In case of leaks in the water
system, immediately switch
off the equipment at the on/
off switch (5) and disconnect
the mains cable (8) of the
equipment from the mains.
There is a risk of electric
shock. Start restoring the wa-
ter connections (see "Initial
Operation – Setting up").
If there is still air in the equipment,
please proceed as follows:
Bleed the supply hose:
1. Remove the quick connection for the
garden hose adapter on the water
connection (9) and open the water tap
until water with no bubbles emerges.
2. Close the water tap.
3. Connect the supply hose to the equip-
ment with the aid of the quick connec-
tion for the garden hose adapter (9).
4. Fully open the water tap.
Bleed the equipment:
5. Switch on the equipment at the on/off
switch (5) until the pressure has built
up.
6. Switch off the equipment at the on/off
switch (5).
10
7. Depress the start lever on the spray
gun (10) until the pressure is released.
8. Please repeat steps 5. to 7. several
times until there is no further air in the
equipment.
Interrupting operation
•
Release the lever of the gun (
•
During prolonged work intervals turn
off the washer by its ON / OFF switch
A
(
5).
Ending operation
•
After working with cleaning agents,
run the equipment with clean water to
completely rinse the cleaning agent
from the pipes.
•
Release the lever of the gun (
•
Turn off the pressure by its ON / OFF
A
switch (
5).
•
Turn off the water tap.
•
Pull the lever of the gun (
the pressure existing within the system.
•
Pull the mains plug and wind up the
mains cable.
•
Disconnect the pressure washer from
the water mains.
Using detergents
The washer was designed for operation
with a neutral detergent based on a bio-
logically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
F
Fixing the Wheels
Both of the front wheels can be fastened
in order to prevent the unintentional rolling
away of the pressure washer.
A
10).
A
10).
A
10) to vent