Indoor Temperature - PCE Instruments PCE-FWS-20 Bedienungsanleitung

6.3.1

Indoor temperature

Activate the indoor temperature related setting by:
1. Touch the INDOOR TEMPERATURE section, + button
and – button will be flashing. Touch the + button or –
button to Shift the display unit between °C and °F.
2. Touch the INDOOR TEMPERATURE section again to set
the indoor temperature high alarm function, the +,
ON/OFF and – button will be flashing, HI AL icon will light
up. Touch the + button or – button to change the value,
hold the + button or – button for 3s to change the number
in great step. Touch the ON/OFF button to choose the
alarm on or off (if alarm is enabled, the speaker icon will be
turned on indicating the alarm function has been enabled).
3. Touch the INDOOR TEMPERATURE section the third time
to set the indoor temperature low alarm function, the +,
ON/OFF and – button will be flashing, LO AL icon will light
up. Touch the + button or – button to change the value,
hold the + button or – button for 3s to change the number
in great step. Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the
speaker icon will be turned on indicating the alarm function has been enabled).
4. Touch the INDOOR TEMPERATURE section the fourth time to display maximum indoor
temperature record, the maximum records will be flashing, MAX icon will light up as well. Hold the
flashing max value for 3s, the maximum value will be reset to current reading.
5. Touch the INDOOR TEMPERATURE section the fifth time to display minimum indoor
temperature record, the minimum records will be flashing, MIN icon will light up as well. Hold the
flashing min value for 3s, the minimum value will be reset to current reading.
Manual
11